How to connect your TV to the Internet via Wi-Fi wirelessly

If you want to enjoy watching video content on a huge TV display, the question arises of how to connect the TV to the Internet via WiFi. To set up a wireless connection, it is important to first understand whether your TV set has the Smart TV function or is a type of device without a built-in SmartTV. Even if the TV is an outdated model, it can still be connected to a wi-fi network, which will be discussed later.

How to connect a modern Smart TV to the Internet via Wi-Fi without cables

Owners of modern TVs are interested in the question of how to connect a TV to the Internet via WiFi without wires. It is important to note that if the wireless connection type is selected, interference is sometimes observed that is absent when using a router connected by cable to the TV. However, when using a wireless connection, you do not have to run wires, cluttering up the room space. Smart TV models with a built-in Wi-Fi module are often equipped with an RJ-45 connector, allowing you to connect the TV receiver to the network using a wire. Any provider can be chosen as a provider –
Rostelecom, Dom.Ru, Beeline and others. Before connecting your smart TV to the Internet, you should check if the TV receiver has a built-in module that allows you to establish wireless connections. If there is, then no additional devices are required to access the network. However, there are models that are not equipped with Wi-Fi, but support the connection of an external USB module.
In the second case, you will have to additionally purchase a wi-fi adapter. It is important to look at its specification so that the device is compatible with the TV receiver model. If the TV does not have built-in Wi-Fi, but it is possible to connect via the LAN port, you can use two wireless connection schemes.
The first option involves connecting it with a cable to a second router that supports the function of receiving a wireless signal. The second way is to connect with a LAN adapter. This equipment is designed to access the Internet via Wi-Fi and cable distribution. To set up such a TV adapter, you will need to turn it on to the local network on your PC. Then you can connect to the TV. Step-by-step instructions on how to connect Smart TV to the Internet via a Wi-Fi router include the following steps:

1. Press the “Menu” button on the remote control.
2. Then select the “Network” section, then “Network settings”.
3. After that, switch to the “Wireless (general)” item.
4. The display will show a list of found networks. Here you need to specify your own and click on the “Next” button.
5. A window will appear with a virtual keyboard, with which you should write a password that opens access to the network. To control the cursor, you can use the arrows on the remote.

Or you can connect a computer mouse or keyboard to the TV via a wire. This will make the data entry process easier. After completing the above steps, the connection should be established.

Connecting the TV to the Internet via Wi-Fi can also be implemented using WPS. This function allows you to set automatic connection settings between the router and the TV device without requiring a password. If it is supported by the router, then it should have the designation “Wireless WPS”. In this case, you need to select an item with the same name on the TV receiver and click on the same button on the router. It should be held for about 15 seconds. As a result, connection autoconfiguration can be considered completed.

One Foot Connection is a feature that allows you to connect a Samsung TV to a wi-fi router from the same manufacturer. Owners of such devices just need to find this item in the menu and wait for automatic pairing.
After completing the settings that provide access to the Internet, the user will need to go to the “Menu” section. Then select “Support”, then – “Smart Hub”. This service allows you to find useful information sources and widgets. It also has a built-in browser that allows you to open sites and watch videos.

How to connect a regular TV to the Internet via Wi-Fi all options

If the house has an old TV receiver without the necessary connectors, then the question arises of how to connect a regular TV to the Internet via WiFi. This model can also be connected to a router. This does not require an HDMI port. It is enough that the TV can connect to external devices through the “tulips”.
To connect it to the wireless Internet, you will need to buy a special TV set-top box. It will be equipped with the necessary ports that allow you to connect to the router by wire. To connect wireless Internet to an old TV, you will need to get an Android Mini PC Box set-top box. Such a device may have not only a LAN / WAN connector, but also a wireless Wi-Fi module.
Then, wires are not required to connect to the network through the router. The prefix implements the ability to connect to the router and process incoming information. While the TV receiver will act as a monitor. However, before buying a set-top box, you should read the instructions for your TV, which will indicate the supported functions.

Without special wi-fi module

Owners of older models are worried about whether a TV without Smart TV can be connected to the Internet. The answer to this question is yes and depends on the presence of a cable connection port on the receiver. If this is not available, you will have to buy a TV set-top box, and use it to connect to the router via wire. In this case, it is recommended to choose a branded device. In addition, it is possible to go online through the game console.
If you are curious about how to play
videos from iPhone to TV via Wi-Fi, then you can access the Internet thanks to the Google Chromecast media player. This device allows you to watch videos from online platforms on a large screen.
Another option on how to make a Wi-Fi connection on a TV if it is not there is to use a special adapter. Such equipment does not contain media functions, however, it allows you to pick up a signal from a local wireless network, opening up access to the Internet. Before purchasing a Wi-Fi adapter, you need to make sure it is compatible with your TV receiver. It is worth noting that you need a USB connector to connect it. It is important to pay attention to the frequency and power of the transmitter. To avoid interference, the adapter should be placed as close as possible to the router.

We connect Samsung TVs of different series to wi-fi

Before you turn on Wi-Fi on your Samsung TV, you should make sure that the Smart Hub service is present on it. Otherwise, you will have to buy a TV set-top box.
M series TV receivers manufactured in 2017 and later. To enable wireless Internet on the TV of these series, it is enough to know the name of the Wi-Fi and the password for it. To do this, you will need to do the following steps:

1. Use the “Home” button on the remote control.
2. Select the “Settings” block on the TV screen.
3. Go to the “General” tab, then to the “Network” item.
4. Switch to the line “Network settings”.
5. Specify the type of signal “Wireless”.
6. Wait until the TV detects wireless networks and select your own among them.
7. The keyboard will appear on the screen. Here you need to enter the password for Wi-Fi and click on “Finish”. To view the written access code, you can check the box next to “Show. password”.
8. After completing the verification of the entered combination, it remains to click on “OK”.

How to connect a Samsung Smart TV to the Internet via Wi-Fi: https://youtu.be/A5ToEHek-F0

How to connect LG Smart TV to wi-fi

If the TV is without Smart TV, then in order to connect it to the Internet, you should inspect the device for the presence of a LAN connector, which should be located on the back or side panel. In this case, you will need to select a wired network connection in the settings.
When using the new model, the sequence of actions will be as follows:

1. Go to your TV settings.
2. Select the “Advanced settings” block.
3. Next, open the “Network” item, after – “Connect to a Wi-Fi network”.
4. Among the presented names in the list, select the desired option.
5. Enter the password and confirm the connection to the wireless network.

If it comes to a model without a built-in module, you should figure out how to connect the cable to the TV. The wire must be long enough. The TV case must have a LAN connector. It is necessary to insert one end of the cord into the TV receiver, and connect the other to the router. Then set up signal reception by going to the “Networks” section. How to connect a TV to LG Wi-Fi – solving the problem of connecting Smart LJ to a wireless network: https://youtu.be/UG9NJ6xQukg

Wireless internet connection on Philips Smart TV

If you are wondering how to connect wi-fi internet to a Philips TV, then you need to do the following:

1. Press the “Settings” button on the remote control, then select “All settings”.
2. Then go to “Wireless and Networks”.
3. Then open the “Wired or Wi-Fi” block, then – “Connect to the network”.
4. Specify the preferred connection type – WPS or wireless.
5. Click the “Connect” button to establish a connection.

Xiaomi

Devices from this company are based on Android TV. The procedure for connecting Xiaomi TV to a TV via Wi-Fi:

1. Open the settings on your TV.
2. Find the column “Network and Internet”.
3. Select the “Wi-Fi” option and start scanning the found access point.
4. Find a home network by name.
5. Enter the current password and wait until a message about a successful connection appears.

SONY TVs

Consecutive steps on how to connect a TV to a router on a TV of this brand:

1. Click on the “HOME” button using the remote control.
2. Go to the “Settings” section.
3. Select the “Network” subsection.
4. Go to “Network Setup”.
5. Then make a choice in favor of “Wireless Setup”.
6. Set the appropriate connection type and specify the found network to complete the connection.

How to connect to WiFi on Android Smart TV – easy connection without wires: https://youtu.be/lGEq3VIArXs

Problems and solution

In some cases, it happens that the TV does not connect to Wi-Fi. If the wireless connection cannot be established, you will need to go to the IP address settings. Then re-confirm the “Automatically obtain an IP address” function. If the problem persists, it is likely that the router is not enabled to automatically connect to the DCHP server. For security purposes, IP address assignment is often done manually.
To change, open the “Network and Internet” block and scroll it to the “IP address settings” item. Next, you will need to manually enter the standard IP, which is indicated on the router. In the “DNS” line, you can enter the IP address “192.168.1.1”.
The next probable cause of an error when connecting a TV receiver to Wi-Fi through a router is restrictions on connecting unknown devices. To fix this, you need to go to the router settings. Next, add the TV to the list of registered devices for which access to the network is allowed. If the connection of the TV to the Internet via WiFi was unsuccessful, first of all it is worth checking the correctness of the password. It is recommended to pay special attention to the register and keyboard layout.
The next way to troubleshoot network connectivity issues is to unplug the router from the power source. Then you can turn it back on and try to establish a wireless connection again. To check the TV’s performance, it is advisable to try connecting to a different network. It is recommended to use a smartphone as an access point. If after that the network is working, you need to contact your Internet provider. Otherwise, performing a factory reset on the TV will help. If this method does not work, you will have to visit the service center. If the wireless network is not detected when the TV is connected, it is recommended to disconnect the connection and try again after a few seconds. It is also worth checking the performance of the router by seeing if other devices can see Wi-Fi.