ZMedia Proxy application, its functionality and configuration

ZMedia Proxy Приложения

ZMedia Proxy is a decoder application for Zabava (Wink) and Peers streams, as well as your local m3u playlists. The program allows you to watch hundreds of TV channels and thousands of films from these services for free. In the article you will get acquainted with the functions of the application, you will find links to download the program itself and to playlists for it.

What is ZMedia Proxy?

The ZMedia Proxy platform decrypts playlists from the Zabava (Wink) and Peers video services, thanks to which we can watch more than 700 TB channels for free in different picture quality. The application was originally created for Android-based media consoles, but now it can also be installed on:
  • mobile devices with Android OS;
  • computers;
  • routers.

ZMedia ProxyZMedia Proxy is not an IPTV player, by itself it does not play any content, but simply decodes the list and presents it to the player, which includes the channel you requested. The program can work with absolutely any IPTV player, you do not need to download any specific one.

For movie playlists, it is best to use the OttPlay (Televizo). These playlists are heavy and may not load in some other players such as TiviMate.

The main characteristics of the ZMedia Proxy application and its system requirements are listed in the table below.

Parameter name Description
Creator of the program Unknown.
Category the platform belongs to Multimedia.
Interface language The application is multilingual, including Russian.
Supported devices and OC TV devices and phones on Android version 4.0 and higher, computers, routers.

Possibilities and features of the program:

  • autostart when the device is turned on;
  • a huge library of TV channels with content in various genres – for children, with news (across the country and individual regions), with sports competitions, educational, about historical events, entertainment (shows, concerts), culinary, religious, etc .;
  • decryption of Zabava and PeersTV streams;
  • there is a dark design that can be turned on in the settings;
  • simultaneous support for up to three external playlists (added independently), and the ability to combine them into one;
  • selection of the best quality of the reproduced content (if there are several of them in the existing playlist).

Download ZMedia Proxy

Direct link to the latest version of the application – https://www.tvbox.one/tvbox-files/ZMedia%20Proxy-0.0.38a-official.apk. It already has Russian playlists built in by default. You can also download the previous variations, if the new one cannot be installed for some reason:

  • ZMedia Proxy 0.0.38a.133t. Download link – https://cloud.mail.ru/public/2uQy/46MPCU6fK.
  • ZMedia Proxy 0.0.37a. Download link – https://drive.google.com/u/0/open?id=1o701fiHKLkje841P2jr422ppNIMtLEaV.
  • ZMedia Proxy 0.0.37. Download link – https://drive.google.com/file/d/1BLYxehU0Q3ONf03ADFDjE9ISBIudoEjl/view.
  • ZMedia Proxy VoD 0.0.36a. Download link – https://cloud.mail.ru/public/2uQy/46MPCU6fK.
  • ZMedia Proxy 0.0.32a.133t. Download link – https://drive.google.com/file/d/17fyFGeHq13KcWNM2EG1eeWEuFmWx-u44/view.

Launching and configuring ZMedia Proxy

To start using the ZMedia Proxy application, you need to embed a playlist into it. We offer several to choose from (links for insertion into players):

  • general link – http://127.0.0.1:7171/playlist.m3u8 (everything that is in the playlists below is included here);
  • only Zabava (Wink) – http://127.0.0.1:7171/playlist1.m3u8;
  • PeersTV only – http://127.0.0.1:7171/playlist2.m3u8;
  • movies only – http://127.0.0.1:7171/playlist3.m3u8.

“Zabava (Wink)” playlists for the application itself:

  • With erotic channels. This includes 565 sources, among them – Boomerang, Exxxotica HD, STS, Channel One, Shalun HD, Friday !, Russian Night, REN TV, Baby TV, RuTV, NTV, Blockbuster HD, # ё HD and others. There are backup sources. Direct download link – http://immo.date/ero.m3u.
  • No erotic channels. This includes 323 sources, among them – all federal, as well as AIVA HD, Kaskad, STS Love, 9 Volna, Ivanovskoe public television, Impulse, NTS Irkutsk and others. There are backup sources. Direct download link – https://pastebin.com/raw/Lm41DLMs.

On Android and Android TV

The processes for launching and configuring the ZMedia Proxy app on Android mobile devices and TVs are identical. To embed a playlist on your Android phone or Android TV, follow these steps:

  1. Open the app on your device. Click on the “Playlists” item on the top bar.Playlists
  2. If you downloaded the latest version of the application, then the “Playlist 1” line is already filled in. We advise you not to clear it, but simply add playlists to free columns. To do this, click on the “Playlist 2” line and paste the previously copied link to the playlist there.Fill

After the playlist / playlists are embedded, do the following:

  1. Go to “Settings” (item to the left of “Playlists” on the top bar). Check the box next to “Auto select the best quality for the stream” here.Customization
  2. Go to the “Status” section and click the “Start” button located at the bottom of the screen. Launch

The ZMedia Proxy program is now running and fully configured. Let’s move on to setting up the player:

  1. Go to the player installed on the device through the main menu (in our case it is “TiviMate”). Menu
  2. Enter the address to the playlist for the player – for example, http://127.0.0.1:7171/playlist.m3u8, and click “Next” (the button is on the right side of the screen). Address
  3. Wait until the end of processing and click “Next” again. Then check the information on the screen and, if everything is correct, click “Finish”.Further
  4. A TV program will appear in front of you, but it will be inactive – wait a couple of minutes for the TV guide to update. You do not need to click anywhere in addition.TV program
  5. When the TV guide is updated, the channels will have icons, and the video will start playing at the top of the screen, which is now broadcasting on the TV channel first in the playlist. TV guide

This completes the setup and preparation of the Android application for operation, and you can start viewing.

On Raspberry Pi

Launching and configuring the ZMedia Proxy app on Raspberry Pi computers is a bit trickier than on Android devices, but if you follow the steps carefully and clearly, you should be fine.

The Raspberry Pi is a bank card-sized single board computer. It was originally developed as a low-cost computer science teaching system, but later gained wider acceptance and acceptance among users.

There are several configuration methods you can use here. Through:

  • SSH network protocol;
  • WinSCP software.

For those who see these sets of letters for the first time, it is better to use the second method. It is simpler and easier to understand. To do this, you need to download and install the WinSCP software on the device (it is freely available, just type the name into the search bar of the browser. After starting the WinSCP platform, a program window with a new connection will appear in front of you. In it, you need to do the following (for example, the Libreelec system) :

  1. Select the SFTP protocol, in the “Hostname” field, enter the IP address of your device (most often written on it). Next, fill in the “Username” and “Password” lines. On this system, the default username is “root” and the password is “libreelec”. After filling, click “Login”.To come in
  2. You will see a list of folders, we need a hidden folder called “.config”. But for it to appear, you need to configure the display of hidden folders in the WinSCP software (how to do this – see below, in the next instruction). When the folder is displayed, open it.Folder
  3. Create a “zmp” folder inside “.config”. Copy the file with the application into the created folder – it is called “zmp-linux-arm7”.InsideClick
  4. Write down the autorun of this file. To do this, go back to the “.config” folder and find the “autostart.sh” file. If not, create. If it exists, just open it and write the following command (replace “x” with the address of your Raspberry Pi): #! / Bin / sh (/storage/.config/zmp/zmp-linux-arm7 –host 192.168.1. x –port 7171 https://pastebin.com/raw/Lm41DLMs) & After filling, save and close the file.File
  5. Make the “autostart.sh” file executable by right-clicking on it and selecting “Properties”, in which you need to fill in the “Oct” column – write in it a combination of numbers “0755”. Click “Ok”, thereby saving the changes.Make file

This completes the installation and configuration of ZMedia Proxy on the Raspberry Pi single board computer. Now launch any PVR client and paste the link to the playlist. The address should look like this –
http: //192.168.xx: 7171 / playlist.m3u8. Instead of “x”, also insert your address here.

After registering the playlist, run the program. If the playlist doesn’t work, try restarting your Raspberry Pi.

Instructions for enabling the display of hidden files in WinSCP software:

  1. Go to the “Options” section, which is located in the upper menu of the program, and select “Settings”. Settings
  2. In the left part of the window that opens, select the word “Panels” and activate the very first item – “Show hidden files”. Click “Ok” to save your changes.Panels

After that, all hidden files will be displayed in the general lists and they can be found.

On a router with Padavan software

The advantage of running the ZMedia Proxy program on a router is that after that you can watch TV channels for free on any device connected to it – be it a computer, TV receiver, phone or TB set-top box. The process for configuring the program on a router and a Raspberry Pi is very similar. But there are still some differences. How to start and configure ZMedia Proxy on a router (assuming you have already installed Padavan firmware and deployed Entware on a USB stick):

  1. Enable “ssh” in the web interface of the router itself – for this, in the “Administration” section, go to the “Services” tab and put “Yes” in front of the “Enable ssh server?” Administration
  2. Open the installed WinSCP. Select “SFTP” as the transmission protocol, in the “Hostname” field, enter the address of your router. In the “Username” and “Password” lines, enter your input data from the router’s web interface. Click the “Login” button.Password
  3. Go to the “media” folder by selecting it in the list that opens. Inside it, select the name of the USB flash drive inserted into the device and then the “opt” folder. Copy a file called “zmp-linux-mipsle” into it.List
  4. Create / open the file “zmpstart.sh” and write the following into it (instead of “x” we insert the address of your router): #! / Bin / sh (/ media / AiDisk_a1 / opt / zmp-linux-mipsle –host 192.168.xx –port 7171 –best https://pastebin.com/raw/Lm41DLMs) & Open file
  5. Save the file and close it. Then right-click on the file “zmpstart.sh”, select “Properties” and enter the combination of numbers “0755” in the “Permissions”.Save

Now we reboot the router and add a link to the playlist in any IPTV player. We will not describe the launch of the application on devices with Windows and Linux operating systems, since this process is too complicated and dreary – an ordinary user cannot cope with it, it will only waste nerves and time. But such an installation is also possible.

How to use the program?

The ZMedia Proxy application has a very user-friendly interface. Everything here is concise and clear, so there will be no problems using the program. You can see in detail how to set up and use ZMedia Proxy in this video review:

Possible problems and errors

If channels from the Zabava service do not work through the application, you can solve the problem by adding? Version = 2 to the end of links to playlists. You can also try merging several playlists into one (if there are more playlists added). You can contact this and other problems, as well as any questions about the application, on the official forum – https://w3bsit3-dns.com/forum/index.php?showtopic=740069&st=520. The developer himself and experienced users of the program are responsible there. ZMedia Proxy is a decryptor, by downloading which you can watch encrypted playlists from Zabava (Wink) and Peers services for free. Downloading and configuring the app on a TB device or Android phone is easy. It will be more difficult to install on a router or Raspberry Pi, but if you follow the instructions carefully, then this is quite feasible.

Rate author
Digital television
Add a comment